Cedar Scrying Bowl

prairie bench scrying bowl 4
We estimate this burl to be about 200 years old.

 

A local tug operator claimed an ancient cedar burl from the Fraser River. He passed it on to Prairie Bench with the wish that we “do something creative.” That’s a fun request.

The cedar burl was marred with saw cuts and completely waterlogged.  Immediately we sanded the cut edge smooth and soaked it in poly, leaving the bark and outside exposed. Then it sat under cover in a big plant stand for a year. This week was the time when the stars aligned to create a scrying bowl. Nostradamus is purported to have used one making predictions.

The goal for us was to create a large, shallow basin supported by a cauldron style tripod. An ash tree dropped us a ‘rowan’ branch and we dried this as well. The legs were a complex puzzle. Three legs, interwoven that would support the weight of the large burl. We added a cedar leg which conformed to the bends of the two rowan legs.

The base was cinched in an arrangement which locked together naturally, then we drilled holes and tacked the legs together with hazelnut dowel.

prairie bench scrying bowl 2
Rowan limbs interwoven with a cedar limb create a tripod
prairie bench scrying bowl 12
We’re after that goblet shape that has the natural look of a bird’s nest or antlers. With three legs it should look like a cauldron.

Meanwhile, the dry cedar burl was resanded (during this sanding, the bowl was ground out to its final shape and depth), any slivers whittled off, and the entire burl was soaked in poly. This wrapped and preserved the wood in an airtight shell for future generations. If someone doesn’t like polyurethane, it can easily be sanded off and natural oils can be applied. For now, the wood is saved.

prairie bench scrying bowl 1
We were able to unlock some of the beautiful quilting effect within the burl.

The burl was suspended by a crane on the back of our trusty bush truck and the limbs were ground down to receive the large basin. After the scrying bowl was leveled by our Royal Leveler, we made final adjustments to the position and any rough edges were whittled down.

The large burl is lowered by crane and eased into its cradle
The large burl is lowered by crane and eased into its cradle
prairie bench scrying bowl 7
Ready to receive
prairie bench scrying bowl 9
Royal leveler approves
prairie bench scrying bowl 10
The scrying bowl has landed
prairie bench scrying bowl 11
The dogwood tree in the background demonstrates balance in design. Hopefully our cedar scrying bowl comes close.

 

The result is a 200 year old cedar burl that floated down river suspended by rowan branches that dropped from a tree. No nails or screws were used, just glue, dowels and pressure. This was a complex project but the finished piece is beautiful and unique. It has a home, but will make the rounds for show and tell.

How does a scrying bowl work? Pour spring water into the basin outdoors at night and behold the reflection of the stars as you gaze into the bowl. Some say you can see the future. Check back we’ll post some pics of the bowl in use and provide the final measurements.

 

Twin Cedar Benches

Raw cedar benches just before finishing.

 

Here’s two more benches to add to our Woodland Collection. A client chose two cedar slabs for patio benches. Each was approximately 7′ long x 18″ wide and 3″ thick. This enabled us to lop off the ends and stack it upright for legs and a seat. A hemlock trestle was added for stability. We split the leg, notch out the join by hand, and glue the entire piece back together with hazelnut dowels for support.

Each bench was left with live edges, saw marks and unique knots. The surface was ground with 80 grit, then 120. The edges were ground to remove any slivers and the entire bench was soaked in poly. The bench is turned upside down and poly is poured into the open grain to make it last for years outdoors. Any finish will eventually wear away with use, sun, and rain, but the client can easily wipe some on whenever they want to restore that sheen.

Cedar has long strands that like to peel away from the core. It’s a good carving wood for vertical designs, however the cut edges can remain rough no matter how much sanding. That’s just a characteristic of this wood. Hardwoods, like maple and birch, can be polished to a fine finish from any angle, but cedar is great for that rugged, outdoor style.

#137 BL 07 13
#138 BL 07 13

Approximate sizes: 42″ long 18″ deep 17″ tall.
Wood source: hawleyscape.com