patio

Western Dining Table

by Prairie Bench0

prairiebench country dining 1

This is a western style dining table made from reclaimed untreated spruce planks and finished in our Country rustic and polyurethane for easy care. We used a water-based stain on this piece to ensure food safe use. The poly top coat dries to a durable finish.

The table is 4.5′ x 5′ with four 6″ thick corner posts. The table is 28 7/8″ tall, allowing for a floor protector which makes the table exactly 29″.

prairiebench country dining 8

The table surface planks are offset slightly to give a real rustic feel and touch. We also used a hand planer to add texture before sanding smooth. The post and beam design allows the table to be taken apart and moved. Also, the posts are inset to allow lots of leg room and easy access. The table surface is two pieces which buckle together in the middle and lock down at the edges. When installed onsite, there are four bolts which hold the beams to the posts. It’s big and heavy and will easily host eight people sitting comfortably around.

#11-6-14-BL designed in spruce and finished in Prairie Bench Country Rustic and polyurethane. 54″x60″x 29″ tall. This custom table is on its way to a new home  and we wish the owners lots of happy feasting.

Click the pictures to enlarge.

Cedar Coffee Table

by Prairie Bench0

prairie_bench_cedar_coffee

 

 

A client asked for a cedar coffee table. They brought us a large cedar plank, approximately 7 feet long, two feet wide x 4 inches thick, that was still quite wet. We decided to make it right away and the slab can dry on their patio. There was a nice knot on the cut side of the slab, so this became the center point for the design. We chopped the ends at ten degrees on the big miter saw using special rollers to handle the weight. Then we re-cut the ends of the slab from the opposite direction at twenty degrees. These two angles, one half of the other, make the design symmetrical and balanced. Because of the weight of the legs, four inch aggressive screws were used with glue to lock the wood together from below. We didn’t want dowels interrupting the beautiful grain on this specimen. Cedar has long strands and will crack and split with time and that’s part of the look. Because the wood is still carrying a lot of water,  we only applied finish to the top and ends of the wood. The underside and inside legs can stay open for evaporation.  A table this size will drink up lots of finish over the years.

Size: 51″ long x 22″wide x 20″ tall. Slab is 4″ thick. Image: the table was just glued together and is sitting on blocks. Wood Source: hawleyscape.com

Cedar Benches

by Prairie Bench0

 

These are approximately 48″ long and 15″ wide x 18″ tall. Ideal for hallways, entry ways, and patios. The 2″ thick cedar slabs are finished to 180 grit and coated in clear poly. The legs are hand fashioned from the same slab and with bark highlights.

 

pb cedar slab benches 1

pb cedar slab benches 3

pb cedar slab benches 4

pb cedar slab benches 2

 

 

Twin Cedar Benches

by Prairie Bench0
Raw cedar benches just before finishing.

 

Here’s two more benches to add to our Woodland Collection. A client chose two cedar slabs for patio benches. Each was approximately 7′ long x 18″ wide and 3″ thick. This enabled us to lop off the ends and stack it upright for legs and a seat. A hemlock trestle was added for stability. We split the leg, notch out the join by hand, and glue the entire piece back together with hazelnut dowels for support.

Each bench was left with live edges, saw marks and unique knots. The surface was ground with 80 grit, then 120. The edges were ground to remove any slivers and the entire bench was soaked in poly. The bench is turned upside down and poly is poured into the open grain to make it last for years outdoors. Any finish will eventually wear away with use, sun, and rain, but the client can easily wipe some on whenever they want to restore that sheen.

Cedar has long strands that like to peel away from the core. It’s a good carving wood for vertical designs, however the cut edges can remain rough no matter how much sanding. That’s just a characteristic of this wood. Hardwoods, like maple and birch, can be polished to a fine finish from any angle, but cedar is great for that rugged, outdoor style.

#137 BL 07 13
#138 BL 07 13

Approximate sizes: 42″ long 18″ deep 17″ tall.
Wood source: hawleyscape.com