Cottage Kitchen Counter

A kitchen cabinet we did for a rustic country cottage with some onsite pine stock. The entire assembly can be detached from the wall using six screws. Finished in butcher block and poly surrounding the sink. Sink is top mounted, siliconed, and strapped. Tile is sandstone and mixed pencil tile. The counter frame is spruce with laminated pine and spruce on the top. Doors are pine and spruce framed, finished in polyurethane. Handles are natural pieces of mountain ash. Total cost of materials including taps, $150. The stool was a fun extra because we were designing chairs for another project: spruce, a dark stain mix on the legs, finished in poly and topped with a waterproof satin finish.

Table for One

We found an interesting steel rod chair. It’s rusty and the seat was missing, but there are no accidental bends and the ball bearing feet are intact. The welds are still good. Rather than paint the metal, we’ve weather treated it the way we found it. The seat was made from left over spruce slats tongue and grooved, glued and stained a deep burgundy—the inspiration was the evening sky, perfect for a quality cup of coffee and some quiet reflection.

There was more spruce than we knew what to do with, so we also made hallway shelves, a spice rack, a tea cupboard, and a little table for one. Same technique, glued to fit and the leg was cut from six slats and pressed together like a vertical jigsaw puzzle. We did two tables, one with a round top and one square…alas the round top was claimed by a friend. We hope to have a picture of the entire set together some time.

It was a fun side project using slightly warped, left over spruce.

Table: 13″ wide, 27″ tall, 10″ base. Chair: 18″ tall at seat, 34″ back, 13″ wide.

Finished in oil stain and polyurethane.

 

Natural Spruce Empire Stool

This is a traditional empire stool which was designed for travel on long journeys. We’ve used reclaimed spruce planks, complete with scratches, and drill marks plugged with ash dowels. There are no nails or screws, in fact no metal is used in the design. The seat is pegged to the frame with hemlock dowels. A cubby connects the frame and adds lateral support. Hand grips are ground out on the underside of the seat. The finish is polyurethane. No stain is used.

These chairs are great accents in a hall or bedroom and can often be found with a few clothes or jackets resting on top.

The finished size is 21″x15″ and stands 18″ tall. #07-29-18  Click on images to expand.

Royal Wedding Thrones

IMG_20160329_224618

When realms combine… We’ve recently completed a set of thrones for both king and queen. Designed in reclaimed spruce and finished in extra layers of Prairiebench Storybook, these are regal accents for a newly weds in their new castle.

IMG_20160329_222013IMG_20160329_225859

Hers: a double-headed eagle crest and Rococo styled crown with seven Cabernet coloured jewels;
His: a double lion crest with crown of seven silver jewels.

These were built on sunny days, outdoors, beneath birds and willow boughs on our farm. To add precision to the design, we asked our friends at Sawitall.net to plot the design onto each backboard.

Royal Couple Wedding Thrones
Size: 5’6″x22″x24″
Finished in Prairiebench Storybook and polyurethane
#04-12-16 AK 1 & 2(2/2)

Bear Shield

pb_bear shield_0027

Prairiebench.com teams with Sawitall.net to create a blend of old and new world decor. We’ve combined a medieval shield with a computer carving; the Bear Shield.

After a few tests we were surprised at the outcome. We’ve done three using old planks for defensive equipment then adding some plotted whittling. After, we glue the slats together and finish with PrairieBench Storybook finish. We’re going to add one more special feature with some glow-in-the-dark paint. Check back for more photos… once the dust settles.

32″ x 22″ glued spruce
Finished in Prairiebench Storybook and polyurethane
Iron handle with sisal wrap
#02-28-16-Bear2
(2/3)

pb_9012pb_9010pb_9013 pb_9015