We received a section of maple log saved from a break in a windstorm at a local park. This is an old tree with some branches close to three feet (90cm) thick. The log was milled into slabs. One section has already become a maple writing desk. This piece called for a more primitive, simple bench design. The ends of the slab were cut and angled for the legs. It’s very heavy and solid. A check/split was filled with gold glue to add a shiny feature rather than hide the mark. The finish is a poly/thinner mix to give a soft, smooth, touchable surface. 100% polyurethane was used on the top for a high gloss finish.
Approx. size: 48″ long, 18″ wide, 18″ tall, 100 lbs. #10-17-18
Golden glue was added to give the appearance of a gold vein in the wood…
No nails or screws were used. The legs have a slight V-channel where the leg sinks into a chiseled recess in the base. Glue fills the void and the legs were then pressed in…
